G4X FuryX

Features

SPEC OVERVIEW:

Inputs

8/10* x Digital inputs

4 x Temperature inputs

9 x Analog inputs

2 x Trigger inputs

2 x Knock inputs

1 x LSU 4.9 Wideband lambda sensor input

Outputs

8 x Injection drives

6 x Ignition drivers

10 x Auxiliary outputs^

+5V Sensor power supply

+8V Sensor power supply

^unused fuel and ignition drives can be used as additional Aux outputs

Communications

2* x CAN bus

1x Serial (RS232) connection

1x USB tuning connection

Physical

Dimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms)

Mass: 680grams

*DI 9 & 10 pins used by second CAN Bus 

What's in the box?

Supplied with USB tuning cable and mounting bracket. 

Requires “A” & “B” looms or “A” & “B” connector kits (not supplied).

Specifications

Engine Configurations

• 1-12 Cylinder Distributed

• 2-12 Cylinder Wasted Spark

• 1-6 Cylinder Direct Spark

• Odd Fire Engines

• 2-Stroke, 4 Stroke and Rotary Engines

• Configurable Firing Order

• Configurable TDC Points (for odd fire)

Inputs/Outputs

• 8 x High Current Injector Drives (suits high impedance injectors)

• 6 x Ignition Channels

• 10 x Auxiliary Outputs (All PWM capable). Aux5-8 can control Stepper Motors and drive High or Low

• 8/10 Digital Inputs (All capable of reading frequencies up to 10kHz). *DI 9 & 10 pins used by second CAN Bus

• +5V Out

• +8V Out

• 4 Temperature Inputs (Configurable pull-ups on ANT1&2)

• 9 x 0-5V Analog Inputs

• 2 x Trigger Inputs (Reluctor, Optical or Hall Sensors)

• On Board Baro

• Built in Wideband Controller

• 3 Axis Accelerometer

Fueling adjustments

• Traditional, Modelled and Modelled Multi-Fuel Equations

• Single-Point Group, Multi-Point Group, Sequential, Semi-Sequential, Group Staged, Sequential Staged and Sequential/Multi Point Group Staged injection modes

• Asynchronous injection (can add more fuel after initial injection if conditions change)

• Quick tune (automated fuel tuning)

• Up to 440 Zone Fuel Table with configurable load and RPM centers. Configurable X and Y Axis Parameters

• Multiple Fuel Tables

• Up to 6D Fuel Mapping (3D Fuel Table + 3x3D Overlay trim tables)

• Injection Rate Control for Group Injection Modes

• Master Enrichment for Traditional Fuel tuning

• Pre-Crank Prime

• First Crank Prime

• Crank Enrichment

• Post Start Enrichment

• Warm Up Enrichment

• Acceleration Enrichment

• IAT Fuel Correction

• Injector Deadtime Compensation

• Injector Short Pulse Width Compensation

• Injector Timing Control with Beginning, Middle or End Injection Definable

• AFR Table Correction

• Dual Closed Loop Lambda

• Individual Cylinder Fuel Trims

• Overrun Fuel Cut

• Idle Load Trims

• Fuel Temperature Correction

• Barometric pressure compensation

• Injector test function

Ignition Adjustments

• Distributor, Twin Distributor, Wasted Spark, Direct Spark, Rotary leading Wasted and Rotary

• Leading Direct Ignition Modes

• Up to 440 Zone Ignition Table with configurable load and RPM centers. Configurable X and Y Axis Parameters

• Configurable Maximum Advance

• Configurable Spark Duration

• Configurable Spark Edge

• Dwell Time Table with configurable X and Y Axis Parameters

• Multiple Ignition Tables

• Up to 6D Ignition Mapping (3D Ignition Table + 3x3D Overlay Trim Tables)

• Individual Cylinder Ignition Trim

• IAT Trim

• Voltage Correction

• ECT Trim

• OEM Compatibility

• CDI Compatibility

• Transient ignition retard

• Adjustable ignition delay compensation

• Ignition test function

• Idle ignition control

Limits

• Engine Temperature Dependent Progressive Limiting

• Dual Vehicle Speed Limits

• System Voltage Limit

• User Configurable RPM Limits based on external input

• MAP Limit with dual tables

• Optional hard cut

• Progressive cut control

• Selectable fuel or ignition limiting

• Ignition trim and configurable trim decay

• Adjustable control range

• Selectable cut effect (adaptive or constant)

Auxiliary Output Options

• Each Output independently configurable

• Unused ignition and Fuel outputs available as auxiliary outputs

• General Purpose Outputs

• General Purpose PWM Outputs

• Fuel Pump Control

• Fuel Pump Speed Control

• Engine Fan Control

• Air Con Clutch Control

• Air Con Fan Control

• Intercooler Spray Control

• Tacho Control

• Speedo Control

• Check Engine Light

• Purge Solenoid

• Oxygen Sensor Heater

• Switched Cam Solenoid Control

• ECU Hold Power Control

• Shift Light Control

• Starter Control

• VVT Cam Solenoid

• Boost Control Solenoid

• Test functions for each output

• Closed loop Stepper Control & Rotary Oil Pump Control

• Idle Speed Soloenoid

• Idle Speed Stepper

• Internal E-Throttle Controller

• External E-Throttle

Digital Inputs

• Each channel independently configurable with pull-up resistors and active state control

• All digital inputs capable of reading frequencies of up to 10kHz

• Duty Cycle measuring on all digital inputs

• Turbo speed

• Ethanol Sensor Control

• Wheel Speed Detection on all digital inputs with additional general-purpose speed inputs

• Anti-Theft control through digital inputs, over CAN or both

• General Purpose switches, speeds, rpms and frequencies

• large variety of input types

Analog Inputs

• Each input independently configurable with preset or custom calibrations and configurable fault conditions

• Built in 3 axis accelerometer

• Built in Barometric Pressure Sensor

• Large variety of Analog input functions

• General Purpose Temperatures, Pressures, Rotary Switches and more

• Analog Inputs can also be used as Digital Inputs

• Large number of built in calibrations

• Ten Calibration Tables and 3 Linear Calibrations for when a custom calibration is required

Triggering

• Digital Trigger Decoding

• Reluctor, Optical Proximity or Hall Sensors

• Programmable filtering and arming thresholds

• Configurable trigger patterns or preset triggering options

• Supports nearly all OEM trigger patterns and custom trigger arrangements

Programmable Math Processing

• Eight individually controllable math channels with up to four parameters in each

• Math channels can be used as table axis’s and as digital or analog inputs

Motor-Sport Features

• Anti Lag

• Launch control

• Gear Shift Control (Digital Inputs, Gear Lever Force or Gear Barrel Position)

• Traction control

Anti-Lag System

• Dual 3D Fuel enrichment, Ignition cut and Ignition retard Tables

• Optional Cyclic idle (normal and cool-down)

• Optional 3D Idle controller Override Tables (one for Antilag and one for Cyclic Idle)

• Lockout condiitons based on engine speed and throttle position with hysteresis

• Launch Control

• Single RPM, 3D RPM Table or Latched (RPM when button pressed) Launch modes

• Progressive cut control

• Selectable fuel or ignition limiting

• Selectable cut effect (adaptive or constant)

• Adjustable control range

• Vehicle speed controlled

• Ignition Trim with optional 3D table and relative or absolute ignition angle options

• Optional 3D Fuel Trim table

Gear Shift Control

• Digital input (clutch switch), gear lever force (sequential gearbox), gear lever force (H pattern gearbox), and gear barrel position sensor input options

• Timed or controlled modes

• Adjustable progressive cut levels

• Power re-introduction control

• Ignition retard control

• Fuel enrichment control

• Cut duration based on gear

Traction Control

• Disable switch

• Various Lockout conditions

• Multiple 3D slip Threshold tables

• Traction Control - controlled tyre slip to improve vehicle safety and driveability

• Uses an advanced Torque Management system to reduce engine torque

• Idle Control

• Solenoid, Stepper or EThrottle Control

• Open or Closed loop actuator control and Closed loop Ignition control available

• Large variety of position offsets for open loop and additional target offsets for closed loop actuator control

• Specific start-up offsets and hold times

• Dashpot functionality to smooth re-entry into idle and prevent undershoot

Electronic Throttle Control

• Has an internal EThrottle Controller and supports external controllers

• Multiple 3D target tables

Boost Control

• Open or Closed Loop Boost Control

• Multiple Target and Base Position Tables

• Multiple Trim tables

• Boost by Gear control

Knock Control

• 2 Built in Knock inputs

• Fuel Enrichment and Ignition Retard functionality

• Adjustable frequency filter

• Adjustable gain (per cylinder)

• Individual cylinder detection

• Individual cylinder ignition retard and fuel enrich

• Adjustable detection angle (start/end)

• Noise threshold table (3D)

• Adjustable ignition retard and fuel enrich sensitivity

• Configurable ignition reintroduction and fuel enrich decay

Variable Valve Timing Control

• Up to 4 cams independent control

• Supports many OEM applications

• Closed loop control

• Multiple 3D Cam angle target tables

• Optional advanced PID control settings for advanced tuners

• Automatic function for calibrating cam angles

Chassis and Body

• AC Control - Basic and Advanced modes available

• AntiTheft - Via Digital Input, CAN or both

• Speed based cruise control (EThrottle only)

• Gear Detection - CAN, RPM/Speed or Analog Position Sensor

• Individual wheel speed sources with the ability to specify Driving and Non-Driving wheel speed sources

• Starter control - Multiple options available from very basic to Touch to start.

Torque Management

Logging

• 512 Megabytes of Datalogging

• Up to 250 ECU Logging channels

• Up to 1kHz per channel with a maximum total sample rate of 100kSamples/s when using ECU Logging

• Unlimited channels when using PCLink logging

Communications

• Tuning Port USB on board

• Two CAN buses

• Custom CAN configuration allowing tuners and end users to add support for new CAN devices

Processing

• 150 MHz Specialised Engine Management Microprocessor

• Ignition control to 0.1 degree, fuel to 0.01 ms

• 32 Bit Floating Point Calculation

• 12 Bit ADC Resolution

• 20000+ RPM

• 4Gb Non Volatile Flash

Environment

• Internal Temperature Range -10 - 85oC

• Ambient Temperature Range -30 - 90oC

• Voltage 8 - 22V

• Operating Current 200mA

• Electrical protection on all inputs and outputs

• Onboard Barometric Pressure Sensor

Packaging Contents

• G4X FuryX ECU

• Wiring and Installation Instructions

• USB tuning cable

• 2 large Link Stickers

• 2 small Link Stickers

Manufacturing Standard – ISO 13485

Additional Accessories (purchased separately)

• Intake Air Temperature Sensor

• 3/8 NPT (Aluminium or Steel Mounting Bosses to suit)

• 3 Channel Link Igniter

• Throttle Position Sensor

• 3 Channel Link Igniter

• Wideband O2 Controller & Sensor

• Injector Ballast Resistor Packs